VAG DPF free is the free version of the application VAG DPF that show you the most important data related to the DPF particulate filter and its regeneration phases using an ELM327 Bluetooth/WIFI adapter. With this free app you can statically view 3 parameters related to the particulate filter status. This app doesn't use standard OBD2 commands as almost all other apps, it uses directly CAN commands specific of car model and this is the reason why it doesn't work with every car; due to the use of CAN commands, the app needs al least a decent ELM327 adapter (see note below); some users reports correct app working with a 10-15 euro adapter.
VAG DPF forum: https://www.applagapp.com/forum/
ATTENTION!! This app works only with VW group cars (Audi Volkswagen Seat Skoda) that are equipped with engines listed below; for diesel engines not listed is not guaranteed the full compatibility, so if you anyway buy the app, consider that some or all functions couldn't work correctly.
Engines supported:
DETA (2.0 TDI 190CV)
CRBC (2.0TDI 150CV)
CFHD (2.0TDI 143CV)
CUNA (2.0TDI 184CV)
CFFB (2.0TDI 140CV)
CFWA (1.2TDI 75CV)
CLHA (1.6TDI 105CV)
CXXB (1.6TDI 110CV)
CAYC (1.6TDI 105CV)(partially on Passat 3C MY10)
CAHA (2.0TDI 170CV)(beta, requires verification)
CXHA (2.0 TDI 150CV)
Tested by users:
CFGB(*), CFGC, CJCA, CRMB, CUPA, CUSA, CXFA, CAYB, CAYD, CRLB, CUTA, CFHC, CAGA(*), CSHA, CJCD, DFSB, CLAB, DFLA, DCXA, CFCA, CGLC, CFJB, CFHA, CRUA, DDYA, DFFA, CRKB, DCYA, DFCA, CUUB, CGLB, CUAA, CUSB, CAPA(*), DFGA, DFSF, DFHA, CNHA, DGTE(*), CCWA, DGDA, DLUB, CJCB, DGTD, CDUD, CSUD
(*) = partial support
IMPORTANT some of the engines above may be incompatible, it depends on the engine software version.
Others engines of the same family may be compatible, but they are not yet tested. The list is constantly updated.
Core functions of the application:
- Display of 3 parameters related to the DPF filter: soot mass accumulation in the filter, regeneration duration, km traveled since last regeneration
- Manual update of the parameters
List of queued functions for the next update:
- Increase of the engine compatibility list
Some words about ELM327 adapters:
- OBDLink LX: recommended, expensive but fast and reliable (I used it for development of this app)
- Carista: recommended, affordable price but very reliable (I use it for debug and daily scans)
- China cloned adapter: not recommended, unreliable, you can randomly find decent adapters or fake adapters, you will have unpredictable results
VAG DPF free هو الإصدار المجاني من تطبيق VAG DPF الذي يعرض لك أهم البيانات المتعلقة بمرشح الجسيمات DPF ومراحل تجديده باستخدام محول ELM327 Bluetooth / WIFI. مع هذا التطبيق المجاني ، يمكنك عرض 3 معلمات مرتبطة بحالة مرشح الجسيمات بشكل ثابت. لا يستخدم هذا التطبيق أوامر OBD2 القياسية مثل جميع التطبيقات الأخرى تقريبًا ، بل يستخدم أوامر CAN مباشرة خاصة بطراز السيارة وهذا هو السبب في أنه لا يعمل مع كل سيارة ؛ نظرًا لاستخدام أوامر CAN ، يحتاج التطبيق على الأقل إلى محول ELM327 لائق (انظر الملاحظة أدناه) ؛ تقارير بعض المستخدمين التطبيق الصحيح العمل مع محول 10-15 يورو.
منتدى VAG DPF: https://www.applagapp.com/forum/
ATTENTION !! هذا التطبيق لا يعمل إلا مع سيارات مجموعة VW (Audi Volkswagen Seat Skoda) المجهزة بمحركات مدرجة أدناه ؛ لمحركات الديزل غير المدرجة ليست مضمونة التوافق الكامل ، لذلك إذا كنت تشتري التطبيق على أي حال ، النظر في أن بعض أو جميع الوظائف لا يمكن أن تعمل بشكل صحيح.
المحركات المدعومة:
DETA (2.0 TDI 190CV)
CRBC (2.0TDI 150CV)
CFHD (2.0TDI 143CV)
CUNA (2.0TDI 184CV)
CFFB (2.0TDI 140CV)
CFWA (1.2TDI 75CV)
CLHA (1.6TDI 105CV)
CXXB (1.6TDI 110CV)
CAYC (1.6TDI 105CV) (جزئيًا على Passat 3C MY10)
CAHA (2.0TDI 170CV) (تجريبي ، يتطلب التحقق)
CXHA (2.0 TDI 150CV)
تم اختباره من قبل المستخدمين:
CFGB (*) ، CFGC ، CJCA ، CRMB ، CUPA ، CUSA ، CXFA ، CAYB ، CAYD ، CRLB ، CUTA ، CFHC ، CAGA (*) ، CSHA ، CJCD ، DFSB ، CLAB ، DFLA ، DCXA ، CFCA ، CGLC ، CFJB ، CFHA ، CRUA ، DDYA ، DFFA ، CRKB ، DCYA ، DFCA ، CUUB ، CGLB ، CUAA ، CUSB ، CAPA (*) ، DFGA ، DFSF ، DFHA ، CNHA ، DGTE (*) ، CCWA ، DGDA ، DLUB ، CJCB ، DGTD ، CDUD ، CSUD
(*) = دعم جزئي
IMPORTANT قد تكون بعض المحركات أعلاه غير متوافقة ، ذلك يعتمد على إصدار برنامج المحرك.
قد تكون محركات أخرى من نفس العائلة متوافقة ، لكن لم يتم اختبارها بعد. يتم تحديث القائمة باستمرار.
الوظائف الأساسية للتطبيق:
- عرض 3 معلمات تتعلق بمرشح DPF: تراكم كتلة السخام في المرشح ، ومدة التجديد ، كم سافر منذ التجديد الأخير
- التحديث اليدوي للمعلمات
قائمة وظائف قائمة الانتظار للتحديث التالي:
- زيادة قائمة توافق المحرك
بعض الكلمات حول محولات ELM327:
- OBDLink LX : موصى به ، مكلف ولكنه سريع وموثوق به (لقد استخدمته لتطوير هذا التطبيق)
- Carista : سعر موصى به وبأسعار معقولة ولكنه موثوق للغاية (يمكنني استخدامه للتصحيح والمسح اليومي)
- China cloned adapter : غير مستحسن ، لا يمكن الاعتماد عليه ، يمكنك العثور بشكل عشوائي على محولات لائقة أو محولات وهمية ، سيكون لديك نتائج غير متوقعة